Keyboard Shortcuts

Top  Previous  Next

The photobooth mode in NKRemote can accept the following key presses:

 

F2 - switch to B&W mode and start the photobooth sequence

F3 - switch to color mode and start the photobooth sequence

T - switch to B&W (toned) mode and start the photobooth sequence

F4 - start the photobooth sequence using the current B&W or color setting

F5 - same as F4

F6 - reactivate live view and display ready.jpg screen if previously canceled or cancel live view and display welcome.jpg screen if live view currently active

Ctrl+Alt+F6 - switch from standby to ready mode

Ctrl+F1 - select "Standard" camera Picture Control

Ctrl+F2 - select "Neutral" camera Picture Control

Ctrl+F3 - select "Vivid" camera Picture Control

Ctrl+F4 - select "Monochrome" camera Picture Control

Ctrl+F5 - select "Portrait" camera Picture Control

Ctrl+F6 - select "Landscape" camera Picture Control

Ctrl+A - activate contrast detect AF (only available when live view is enabled)

Ctrl+B - switch to B&W mode but don't start the photobooth sequence

Ctrl+C - switch to color mode but don't start the photobooth sequence

Ctrl+K - switch to color mode but don't start the photobooth sequence (alternative for Ctrl+C)

Ctrl+Alt+P - display the reprint selection dialog

Ctrl+R - reprint the last set of photos without displaying the touchscreen keyboard or print confirmation screens

Ctrl+Alt+R - reprint the last set of photos with touchscreen keyboard and print confirmation screens if enabled

Shift+Ctrl+R - fast reprint of the last set of photos (if output option is set to "Print and save JPEG copy")

Ctrl+T - switch to B&W (toned) mode but don't start the photobooth sequence

Ctrl+W - toggle between B&W and color modes

Ctrl+Z - take photo when the booth is running in clicker mode

A - Accept print when print confirmation window is displayed

W - cycle through color, B&W and B&W (toned) modes

X - Reject print when print confirmation window is displayed

Ctrl+1 - select one copy of prints

Ctrl+2 - select two copies of prints

Ctrl+3 - select three copies of prints

Ctrl+4 - select four copies of prints

Ctrl+5 - select five copies of prints

Ctrl+6 - select six copies of prints

Ctrl+7 - select seven copies of prints

Ctrl+8 - select eight copies of prints

Ctrl+9 - select nine copies of prints

Ctrl+Alt+1 - select profile 1 and start shooting sequence

Ctrl+Alt+2 - select profile 2 and start shooting sequence

Ctrl+Alt+3 - select profile 3 and start shooting sequence

Ctrl+Alt+4 - select profile 4 and start shooting sequence

Ctrl+Alt+5 - select profile 5 and start shooting sequence

Ctrl+Alt+6 - select profile 6 and start shooting sequence

Ctrl+Alt+7 - select profile 7 and start shooting sequence

Ctrl+Alt+8 - select profile 8 and start shooting sequence

Shift+Ctrl+1 - select profile 1

Shift+Ctrl+2 - select profile 2

Shift+Ctrl+3 - select profile 3

Shift+Ctrl+4 - select profile 4

Shift+Ctrl+5 - select profile 5

Shift+Ctrl+6 - select profile 6

Shift+Ctrl+7 - select profile 7

Shift+Ctrl+8 - select profile 8

Shift+Ctrl+9 - select profile 9

Shift+Ctrl+F1 - select profile 10

Shift+Ctrl+F2 - select profile 11

Shift+Ctrl+F3 - select profile 12

Shift+Ctrl+F4 - select profile 13

Shift+Ctrl+F5 - select profile 14

Shift+Ctrl+F6 - select profile 15

Shift+Ctrl+F7 - select profile 16

Shift+Ctrl+F8 - select profile 17

Shift+Ctrl+F9 - select profile 18

Shift+Ctrl+N - select next profile

Shift+Ctrl+P - select previous profile

Number pad '+' - increase the number copies of prints (up to a maximum of 9 copies)

Number pad '-' - decrease the number copies of prints (down to a minimum of 1 copy)

b - cycle through number of copies of prints: 1,2,3,4,5,6,7,8,9,1,2,3...